Home, About, Contact, Terms  CONTACT US

PRICES AND AVAILABILITY OF USED & REFURBISHED PARTS ARE SUBJECT TO CHANGE AT ANY TIME

Connect with us on:

 

1964-77 Cutlass, 442 & F85

Evaporator Units & Related Parts

JUMP MENU:
EVAPORATOR UNITS - 1964-65, 1966-67, 1968-72, 1973-76, 1977          

EVAPORATOR UNIT PARTS - 1968-72, 1973-76, 1977


1964-65 Cutlass, 442 & F85 A/C Evaporator & Blower Parts


EVAPORATOR COIL
19
64-65 Olds Cutlass, 442 & F-85
$299.99 NEW


EVAPORATOR HOUSING
1964-65 Olds Cutlass, 442 & F-85
$199.99
REFINISHED
HOUSING ONLY - DOES NOT INCLUDE ANY CLAMPS, BRACKETS OR SEALS
LIMITED AVAILABILITY


Suction Throttling Valve

EXPANSION VALVE
1964-72 Olds Cutlass, 442 & F-85
$42 NEW


DRAIN HOSE
1964-72 Cutlass, 442 & F85
(Replaces Part # 3149483 & 2465813)
$29.99 NEW

 


BLOWER UNIT
1965-67 Olds Cutlass, 442 & F-85
$325
REBUILT w/New Blower Motor, Vacuum Actuator & Resistor
LIMITED AVAILABILITY


BLOWER WHEEL
1964-72 Cutlass, 442 & F85
$29.99 BEAD-BLASTED/PAINTED
(METAL - 2 3/4" deep, for single slot blower motor shafts)
(GM # 3144683)


BLOWER WHEEL
1964-72 Cutlass, 442 & F85
$29.99 USED
(Plastic - 2 3/4" deep, for dual slot blower motor shafts)

BLOWER WHEEL SPACER
w/Plastic Blower Wheel & Half-moon Blower Motor Shaft
(GM Part # 3004686)

$14.99 USED
 
 
BLOWER WHEEL SPACER
w/Plastic Blower Wheel & Double-Slotted Blower Motor Shaft
$14.99
USED

1965-70 Olds Cutlass, 442 & F85
Blower Resistor
$39 NEW

1964-67 Cutlass, 442 & F85
A/C Blower Motor Vent Tube
$100 USED
WHEN AVAILABLE

1966-67 Cutlass, 442 & F85 A/C Evaporator & Blower Parts


EVAPORATOR UNIT
1966-67 Oldsmobile Cutlass, F85 & 442
$450
NEW Evaporaotr, 134a POA Eliminator/Upgrade Valve, Repl. Expansion Valve & Drain Hose.


EVAPORATOR COIL
1966-67 Olds Cutlass, 442 & F-85
$299.99 NEW


EVAPORATOR HOUSING
1966-67 Olds Cutlass, 442 & F-85
$175
REFINISHED
HOUSING ONLY - DOES NOT INCLUDE ANY CLAMPS, BRACKETS OR SEALS
LIMITED AVAILABILITY


POA Valve

EXPANSION VALVE
1964-72 Olds Cutlass, 442 & F-85
$42 NEW


DRAIN HOSE
1964-72 Cutlass, 442 & F85
(Replaces Part # 3149483 & 2465813)
$29.99 NEW


EXPANSION VALVE SENSING BULB SHIELD
1966-67 Olds Cutlass, 442 & F-85
$35 USED/Zinc-Plated


BLOWER UNIT
1965-67 Olds Cutlass, 442 & F-85
$325
REBUILT w/New Blower Motor, Vacuum Actuator & Resistor
LIMITED AVAILABILITY


BLOWER WHEEL
1964-72 Cutlass, 442 & F85
$29.99 BEAD-BLASTED/PAINTED
(METAL - 2 3/4" deep, for single slot blower motor shafts)
(GM # 3144683)


BLOWER WHEEL
1964-72 Cutlass, 442 & F85
$29.99 USED
(Plastic - 2 3/4" deep, for dual slot blower motor shafts)

BLOWER WHEEL SPACER
w/Plastic Blower Wheel & Half-moon Blower Motor Shaft
(GM Part # 3004686)

$14.99 USED
 
 
BLOWER WHEEL SPACER
w/Plastic Blower Wheel & Double-Slotted Blower Motor Shaft
$14.99
USED

1965-70 Olds Cutlass, 442 & F85
Blower Resistor
$39 NEW
 

RESTORATION ON ALL 1968-73 UNITS INCLUDES:
(unless otherwise noted)

  • NEW evaporator.

  • Standard 134a POA Eliminator OR 134a/R12 Billet POA Eliminator.

  • New Replacement Expansion Valve (w/Standard POA Eliminator).

  • Restored finish on inner and outer evaporator housing.  (Most housings have had some minor repairs.)

  • Blower wheel, blower motor vent tube & vent tube mount. 

  • Reconditioned/tested a/c blower resistor.

  • NEW blower motor

  • POA, expansion valve (Exc. w/Standard POA Eliminator) & evaporator clamps.

  • Cleaned & tested ambient sensor.  (71-72 Units Only)

  • NEW Drain tube & clamp (Except some 70-81 units where one is not used)


1968-72 Cutlass, 442 & F85 A/C Evaporator Units
PLEASE NOTE - All units are built to order and typically take 1-3 weeks from the time a pre-paid order is placed.


$799.99 plus s/h +
1968-70 Cutlass, 442 & F85
Standard 134a POA Valve Eliminator


$849.99 plus s/h +
1968-70 Cutlass, 442 & F85
BILLET  POA Valve Eliminator (134a or R12)
 



$799.99 plus s/h +
1971-72 Cutlass, 442 & F-85
Standard 134a POA Valve Eliminator


$849.99 plus s/h +
1971-72 Cutlass, 442 & F-85
BILLET  POA Valve Eliminator (134a or R12)
 

WANT US TO CUSTOM REBUILD YOUR EVAPORATOR UNIT?

$725 labor + s/h.
Includes new evaporator, blower motor, expansion valve, drain-hose and POA Eliminator/Upgrade Valve***
*** Any additional parts & fiberglass repairs, if needed, are additional. 
UPRADES - $125 to upgrade to BILLET POA ELIMINATOR/UPGRADE VALVE. 
WE DO NOT CURRENTLY OFFER SERVICES ON THE ORIGINAL POA VALVES.


 

1968-72 Cutlass, 442 & F85 A/C Evaporator Parts

EVAPORATOR
1968-72 Olds Cutlass, 442 & F-85

$325 NEW

EVAPORATOR
1968-72 Olds Cutlass, 442 & F-85

$169.99 RECONDITIONED


EXPANSION VALVE
1968-72 Olds Cutlass, 442 & F-85
$42 NEW
Functions the same as the original, but cosmetically different.  Capillary tubes are longer than original and the original clamp to evaporator housing will not fit properly.

 


EXPANSION VALVE
1968-72 Olds Cutlass, 442 & F-85
$115 RECONDITIONED


EXPANSION VALVE BULT CLAMP
1968-72 Olds Cutlass, 442 & F-85
$9.99 USED

Refrigerant "Cork" Tape
Used to insulate the expansion valve sensing bulb.
$
8.99 (12" Strip) NEW


15-51 POA VALVE ELIMINATOR KIT
1968-72 Olds Cutlass, 442 & F-85
$125.00 NEW


RECONDITIONED POA VALVES
CLICK HERE TO GOT TO OUR
VALVES PAGE




DRAIN HOSE
1968-72 Olds Cutlass, 442 & F-85
(Replaces Part # 3149483 & 2465813)
$29.99 NEW


AMBIENT SENSOR SWITCH (Fiber Body)
1971-72 Olds Cutlass, 442 & F-85
(GM # 3917359)

$75.00
RECONDITIONED


AMBIENT SENSOR SWITCH (Tin Body)
1971-72 Olds Cutlass, 442 & F-85
(GM # 483326)
$75.00 RECONDITIONED


BLOWER MOTOR
1968-77 Olds Cutlass, 442 & F-85
(Replaces Part # 4914906)
$49.99 NEW

 


BLOWER MOTOR VENT TUBE
1968-72 Olds Cutlass, 442 & F-85
$69.99 USED


BLOWER WHEEL
1968-72 Olds Cutlass, 442 & F-85
$39.99 BEAD-BLASTED/PAINTED
(METAL - 2 3/4" deep, for single slot blower motor shafts)
(GM # 3144683)
NOTE - Requires blower wheel spacer.  If you don't have your original, this will need to be purchased separately.


BLOWER WHEEL
1968-72 Olds Cutlass, 442 & F-85
$29.99 USED
(Plastic - 2 3/4" deep, for dual slot blower motor shafts)
SPECIFY SINGLE OR DOUBLE SLOT
NOTE - Requires blower wheel spacer.  If you don't have your original, this will need to be purchased separately.

BLOWER WHEEL SPACER
w/Plastic Blower Wheel & Half-moon Blower Motor Shaft
$14.99 USED
 
 
BLOWER WHEEL SPACER
w/Plastic Blower Wheel & Double-Slotted Blower Motor Shaft
$14.99
USED
 


BLOWER MOTOR VENT TUBE CONNECTOR
 (Type-1 - Fits 3/4" opening in housing.)
1968-72 Olds Cutlass, 442 & F-85
$14.99 USED

 


BLOWER MOTOR VENT TUBE CONNECTOR
(Type-2 - Block-Style - Fits 1" opening in housing)
1968-72 Olds Cutlass, 442 & F-85
$19.99 USED


1965-70 Olds Cutlass, 442 & F85
Blower Resistor
$39 NEW
     
BLOWER RESISTOR
1971-72 Olds Cutlass, 442 & F-85
$22.50 NEW


POA VALVE to EVAPORATOR
HOUSING BRACKET CLAMP
TYPE-1 (Narrow)
1968-72 Cutlass/442
$15 BEAD-BLASTED/CLEAR COATED


POA VALVE to EVAPORATOR
HOUSING BRACKET CLAMP
TYPE-2 (Wide)
1968-72 Cutlass/442
$15 BEAD-BLASTED/PAINTED

 


EXPANSION VALVE to EVAPORATOR
HOUSING CLAMP
1968-72 Olds Cutlass, 442 & F-85
$9.99 BEAD-BLASTED/PAINTED

 


EXPANSION VALVE BULT CLAMP
1968-72 Olds Cutlass, 442 & F-85
$9.99 USED


HEATER HOSE GUIDE
1968-72 Cutlass, 442 & F-85
Mounts to the front of the bracket that is riveted to
the top of the outboard (fender side) a/c evaporator housing.

$14.99 Zinc Plated
 

1968-70 Olds Cutlass, 442 & F-85
(WITHOUT ambient sensor opening)
$235.00 
RESTORED
(May have some fiberglass repairs.)

1968-70 Olds Cutlass, 442 & F-85
May have minor defects or stress cracks.
(WITHOUT ambient sensor opening)
$125.00 USED/UNRESTORED
(May have some minor stress cracks, under-coating, etc.)
  


1968-70 Olds Cutlass, 442 & F-85
(WITHOUT ambient sensor opening)
No color match if purchased individually.
$125.00 
RESTORED
(May have some fiberglass repairs.)


1968-70 Olds Cutlass, 442 & F-85
(WITHOUT ambient sensor opening)
Cannot guarantee color match.
May have minor defects or stress cracks.
$75.00 USED/UNRESTORED
(May have some minor stress cracks, under-coating, etc.)


1968-70 Olds Cutlass, 442 & F-85
DRIVER SIDE HALF ONLY
No color match if purchased individually.
$125.00 
RESTORED
(May have some fiberglass repairs.)

1968-70 Olds Cutlass, 442 & F-85
DRIVER SIDE HALF ONLY
Cannot guarantee color match.
May have minor defects or stress cracks.
$75.00 USED/UNRESTORED
(May have some minor stress cracks, under-coating, etc.)

1971-72 Olds Cutlass, 442 & F-85
(WITH ambient sensor opening)
$235.00  RESTORED
(May have some fiberglass repairs.)


1971-72 Olds Cutlass, 442 & F85
Cannot guarantee color match.
May have minor defects or stress cracks.
(WITH ambient sensor opening)
$125.00  USED/UNRESTORED
(May have some minor stress cracks, under-coating, etc.)


1971-72 Olds Cutlass, 442 & F-85
Cannot guarantee color match.
(WITH ambient sensor opening)
$125.00 
RESTORED
(May have some fiberglass repairs.)


1971-72 Olds Cutlass, 442 & F85
Cannot guarantee color match.
May have minor defects or stress cracks.
(WITH ambient sensor opening)
$75.00  USED/UNRESTORED
(May have some minor stress cracks, under-coating, etc.)


1968-72 Olds Cutlass, 442 & F85
DRIVER SIDE HALF ONLY
Cannot guarantee color match.
$125.00 
RESTORED
(May have some fiberglass repairs.)
PICTURE
COMING
SOON
1968-72 Olds Cutlass, 442 & F85
DRIVER SIDE HALF ONLY
Cannot guarantee color match.
May have minor defects or stress cracks.
$75.00  USED/UNRESTORED
(May have some minor stress cracks, under-coating, etc.)
   

1973-76 Olds A-Body A/C Evaporator Units
PLEASE NOTE - All units are built to order and typically take 1-3 weeks from the time a pre-paid order is placed.

RESTORATION ON ALL 1973-76 UNITS INCLUDES:
(unless otherwise noted)
  • Reconditioned evaporator. 

  • Rebuilt VIR (Valves-In-Receiver) with gold zinc-plated upper & lower housings.  (VIR Eliminator available in place of VIR; recommended if using 134a.)

  • Restored finish on inner and outer evaporator housing.  (Occasionally painted black and/or have some of the original undercoating on them.  Most housings have had some minor repairs.)

  • Reconditioned/tested a/c blower resistor.

  • NEW blower motor.

  • Blower wheel, blower motor vent tube & vent tube mount. 

  • VIR clamp.   

  • Cleaned & tested ambient sensor.  (If equipped.)

  • NEW Drain tube & clamp (If equipped.)



$649.99, plus s/h +
1973-76 Olds A-Body

CURRENTLY OUT OF STOCK


WANT US TO CUSTOM REBUILD YOUR EVAPORATOR UNIT?

$499.99 labor + s/h.
Includes new evaporator, blower motor, gold zinc plating of VIR parts (R12 Only) ***
*** Parts & fiberglass repairs, if needed, are additional.  Can substitute a VIR Eliminator Kit (134a or R12) at no additional charge.


 

1973-76 Olds A-Body A/C Evaporator Parts


VIR (VALVES-IN-RECEIVER)
1973-76 Olds A-Body

CLICK HERE FOR MORE INFORMATION ON VIR's


1973-76 General Motors
- VIR Eliminator Kit
Since VIR's cannot be calibrated for the newer 134a, this is the recommended route to take.
It converts the system over the new cycling-orifice system that GM went to in 1977 and has been using ever since.  This does not require cutting or modification of the original factory hoses.
CLICK HERE FOR MORE INFORMATION ON VIR ELIMINATOR/UPGRADE

THIS IS A MUST WHEN CONVERTING TO 134a!

VIR to EVAPORATOR CLAMP
1973-76 Olds A-Body
$14.99 BEAD-BLASTED/PAINTED

CLAMP - A/C Wiring Harness

1973-76 Olds A-Body
$9.99 each. BEAD-BLASTED/PAINTED

BLOWER WHEEL
1973-76 Olds A-Body
$29.99 USED
(Plastic - 3 5/8" deep)
NOTE - Requires blower wheel spacer.  If you don't have your original, this will need to be purchased separately.
  
BLOWER WHEEL SPACER
w/Plastic Blower Wheel & Double-Slotted Blower Motor Shaft
$14.99
USED
   
   
   
   

1977 Olds A-Body A/C Evaporator Units
PLEASE NOTE - All units are built to order and typically take 1-3 weeks from the time a pre-paid order is placed.

RESTORATION ON ALL 1977 UNITS INCLUDES:
(unless otherwise noted)
  • Reconditioned evaporator. 

  • Rebuilt or New Replacement Accumulator.

  • NEW orifice tube.

  • Restored finish on inner and outer evaporator housing.  (Occasionally painted black and/or have some of the original undercoating on them.  Most housings have had some minor repairs.)

  • Reconditioned/tested a/c blower resistor.

  • NEW blower motor.

  • Blower wheel, blower motor vent tube & vent tube mount. 

  • Accumulator & evaporator inlet tube clamps.



$499.99, plus s/h
+

1977 Olds A-Body
CURRENTLY OUT OF STOCK


WANT US TO CUSTOM REBUILD YOUR EVAPORATOR UNIT?

$400 labor + s/h.
Includes new evaporator, blower motor and accumulator***
*** Parts & fiberglass repairs, if needed, are additional.


 

1977 Olds A-Body A/C Evaporator Parts

ACCUMULATOR to EVAPORATOR CLAMP
1977 Olds A-Body
$11.99 NEW

CLAMP - A/C Wiring Harness

1974-77 Olds A-Body
$9.99 each.

BLOWER WHEEL SPACER
w/Plastic Blower Wheel & Half-moon Blower Motor Shaft
$14.99 USED
 
 
BLOWER WHEEL SPACER
w/Plastic Blower Wheel & Double-Slotted Blower Motor Shaft
$14.99
USED
   
 
   
   



ALL USED, REBUILT & RECONDITIONED PRODUCTS HAVE LIMITED AVAILABILITY &
NOT ALL PRODUCTS PICTURED ARE AVAILABLE
ALL INVENTORY IS SUBJECT TO AVAILABILITY & PRICES ARE SUBJECT TO CHANGE AT ANY TIME.

Questions or Stock Requests
CONTACT AVAILABLE BY EMAIL ONLY

OR EMAIL THEPARTG@THEPARTGUY.COM

Ordering Information
CONTACT AVAILABLE BY EMAIL ONLY

OR EMAIL THEPARTG@THEPARTGUY.COM


Post a picture of your car!


American made,
whenever possible!

WE BUY FACTORY A/C PARTS FOR MORE INFO