Corvette, Impala, Chevy Truck, etc. Evaporator Units

RESTORATION ON ALL 1968-72 UNITS INCLUDES: (unless otherwise noted) Reconditioned evaporator! Reconditioned & zinc plated POA valve that can be pre-adjusted to work with R12 OR 134a. Reconditioned & zinc plated expansion valve. Restored finish on inner and outer evaporator housing! Blower motor vent tube & mount. Resistor. *Reconditioned/bench tested blower motor & blower wheel. (ADD NEW FOR ADDITIONAL $35.00!)* POA, expansion valve & evaporator clamps. Cleaned & tested sensor. NEW Drain tube & clamp NEW Drain tube & clamp
CURRENTLY OUT OF STOCK 1968 Corvette. $599.99, plus s/h. CLICK ON IMAGES FOR LARGER & ADDITIONAL VIEWS!	CURRENTLY OUT OF STOCK 1969-72 Corvette. $599.99, plus s/h. CLICK ON IMAGES FOR LARGER & ADDITIONAL VIEWS!
RESTORATION ON ALL 1974-76 UNITS INCLUDES: (unless otherwise noted) Evaporator has been thoroughly flushed clean and pressure tested with refrigerant and 250 pounds of nitrogen pressure Rebuilt VIR (Valves-In-Receiver) with installed POA & expansion valves and gold zinc-plated upper & lower parts Restored finish on inner and outer evaporator housing Blower motor vent tube & mount Resistor Reconditioned/bench tested blower motor & blower wheel All clamps Ambient sensor switch (Some 76 models do not use this switch)
DRAIN HOSE - New 1967-82 Chevy Corvette $29.99	EXPANSION VALVE BULT CLAMP 1967-72 Chevy Corvette $9.99
BLOWER MOTOR - New 1967-76 Chevy Corvette $49.99
BLOWER WHEEL 1963-68 Chevy Corvette $29.99 (Steel - 2 3/4" deep, for single slot blower motor shafts)	BLOWER WHEEL 1969-76 Chevy Corvette $29.99 (Plastic - 2 3/4" deep, for dual slot blower motor shafts)
PICTURE COMING SOON BLOWER MOTOR VENT TUBE 1968-82 Chevrolet Corvette $49.99	BLOWER MOTOR VENT TUBE CONNECTOR 1968-82 Chevrolet Corvette $19.99
AMBIENT SENSOR SWITCH - Good Original 1968 Chevy Corvette $35.00	AMBIENT SENSOR SWITCH - Good Original 1969-early 76 Chevy Corvette $35.00
EXPANSION VALVE to EVAPORATOR HOUSING CLAMP 1963-72 Chevy Corvette $9.99	POA VALVE CLAMP 1968-72 Chevy Corvette $14.99
PICTURE COMING SOON BLOWER RESISTOR - Good Original 1968 Chevrolet Corvette $35.00	BLOWER RESISTOR - Good Original 1969-82 Chevy Corvette $39.99

RESTORATION ON ALL 1974-76 UNITS INCLUDES: (unless otherwise noted) Evaporator has been thoroughly flushed clean and pressure tested with refrigerant and 250 pounds of nitrogen pressure Rebuilt VIR (Valves-In-Receiver) with installed POA & expansion valves and gold zinc-plated upper & lower parts Restored finish on inner and outer evaporator housing Blower motor vent tube & mount Resistor Reconditioned/bench tested blower motor & blower wheel All clamps Ambient sensor switch (Some 76 models do not use this switch)
CURRENTLY OUT OF STOCK 1973-76 Corvette. $549.99, plus s/h. CLICK ON IMAGES FOR LARGER & ADDITIONAL VIEWS!
DRAIN HOSE - New 1967-82 Chevy Corvette $29.99	AMBIENT SENSOR SWITCH - Good Original 1969-early 76 Chevy Corvette $35.00
BLOWER MOTOR - New 1967-76 Chevy Corvette $49.99	BLOWER WHEEL 1969-76 Chevy Corvette $29.99 (Plastic - 2 3/4" deep, for dual slot blower motor shafts)
PICTURE COMING SOON BLOWER MOTOR VENT TUBE 1968-82 Chevrolet Corvette $49.99	BLOWER MOTOR VENT TUBE CONNECTOR 1968-82 Chevrolet Corvette $19.99
BLOWER RESISTOR - Good Original 1969-82 Chevy Corvette $35.00
RESTORATION ON ALL 1977-82 UNITS INCLUDES: (unless otherwise noted) Evaporator has been thoroughly flushed clean and pressure tested with refrigerant and 250 pounds of nitrogen pressure! Rebuilt or New Accumulator NEW fixed-orifice-tube. Restored finish on inner and outer evaporator housing! Blower motor vent tube & mount. Resistor. Reconditioned/bench tested blower motor & blower wheel. All clamps.
1977-82 Corvette. $549.99, plus s/h. CLICK ON IMAGES FOR LARGER & ADDITIONAL VIEWS! IMAGE COMING SOON
PICTURE COMING SOON BLOWER MOTOR VENT TUBE 1968-82 Chevrolet Corvette $49.99	BLOWER MOTOR VENT TUBE CONNECTOR 1968-82 Chevrolet Corvette $19.99
BLOWER RESISTOR - Good Original 1969-82 Chevy Corvette $35.00

RESTORATION ON ALL 1965-66 UNITS INCLUDES: (unless otherwise noted) Evaporator has been thoroughly flushed clean and pressure tested with refrigerant and 250 pounds of nitrogen pressure! Rebuilt/zinc plated/bench tested POA valve that can be pre-adjusted to work with R12 OR 134a. Reconditioned/bench tested/zinc plated expansion valve. Inner and outer evaporator housing! (painted black) Blower motor vent tube & mount. Resistor. Reconditioned blower motor & blower wheel. (CAN ALSO INSTALL A NEW BLOWER MOTOR FOR AN ADDITIONAL $35.00!) Expansion valve & evaporator clamps. Rebuilt Suction Throttling Valve (STV) Cleaned & tested sensor. Drain tube & clamp.
CURRENTLY OUT OF STOCK 1965-early 66 Impala, Caprice & Wagon $450.00, plus s/h. CLICK ON IMAGES FOR LARGER & ADDITIONAL VIEWS!





RESTORATION ON ALL 1967-68 UNITS INCLUDES: (unless otherwise noted) Evaporator thoroughly flushed clean and pressure tested with refrigerant and 250 pounds of nitrogen pressure! Rebuilt/zinc plated/bench tested POA valve that can be pre-adjusted to work with R12 OR 134a. Reconditioned/bench tested/zinc plated expansion valve. Reconditioned/tested ambient sensor switch. Restored show-quality finish on inner and outer evaporator housing! Blower motor vent tube & mount. Reconditioned/bench tested blower motor & blower wheel. POA, expansion valve & evaporator clamps. Drain tube & clamp.
1967-68 Impala, Caprice & Wagon $450.00, plus s/h. CLICK ON IMAGES FOR LARGER & ADDITIONAL VIEWS!





RESTORATION ON ALL 1967-72 UNITS INCLUDES: (unless otherwise noted) Evaporator thoroughly flushed clean and pressure tested with refrigerant and 250 pounds of nitrogen pressure! Rebuilt/zinc plated/bench tested POA valve that can be pre-adjusted to work with R12 OR 134a. Reconditioned/bench tested/zinc plated expansion valve. Restored show-quality finish on inner and outer evaporator housing! Blower motor vent tube & mount. Reconditioned/bench tested blower motor & blower wheel. (ADD $35 for new blower motor) POA, expansion valve & evaporator clamps. NEW Drain tube & clamp
1967-72 Chevy/GMC Truck, Suburban, Cheyenne, Blazer. $450.00, plus s/h.CLICK ON IMAGES FOR LARGER & ADDITIONAL VIEWS!





RESTORATION ON ALL 1967-72 UNITS INCLUDES: (unless otherwise noted) Evaporator has been thoroughly flushed clean and pressure tested with refrigerant and 250 pounds of nitrogen pressure! Restored show-quality finish on inner and outer evaporator housing! Blower motor vent tube. Reconditioned/bench tested blower motor & blower wheel. (ADD $35 for new blower motor) Rebuilt original accumulator. Accumulator & evaporator clamps. NEW Fixed-Orifice-Tube. NEW Thermostat.
1976-77 Chevy/GMC Truck (C & K series) $325.00, plus s/h. CLICK ON IMAGES FOR LARGER & ADDITIONAL VIEWS!